Track ideas and examples

Looking for inspiration for your next track? Here are five track ideas to build with our 3D-printed parts, from the simplest to the most ambitious. Each idea gives its difficulty level, the parts used and, when there is one, the track booklet that goes further. The videos show the parts in action; they only start when you press play.

All our GraviTrax parts complement a GraviTrax or GraviTrax PRO starter set (not the Junior range): to choose well, read our compatibility guide and our comparison Which spinning top should you choose?.

1. The endless loop

Difficulty: easy.

The motorised Ferris wheel lifts the marbles back up by itself: place it at the start of the track, let the marbles run down zigzag rails to a 1-entry funnel spinning top, then bring the exit of the spinning top back to the foot of the wheel. The track then runs in a loop, without anyone having to carry the marbles back up. Start with the three marbles supplied with the wheel, then add more.

Track plans to go further: Building booklet, tracks A and B (PDF): 1-entry funnel spinning top

2. Spinning tops on two levels

Difficulty: intermediate.

Install the 2-entry funnel spinning top and the 3-entry spinning top on the same track, at different heights, and connect them with the orientable tube rails, which link parts even when they are not aligned. The marbles swirl from one funnel to the next along the way. The tracks C and D booklet, designed for these two spinning tops, gives step-by-step plans.

Track plans to go further: Building booklet, tracks C and D (PDF): 2- and 3-entry funnel spinning tops

3. The big six-way junction

Difficulty: advanced.

The 6-entry funnel spinning top becomes the heart of the track: up to six tracks can meet there. The 18 cm marble elevator lifts the marbles up high to feed several starting points, and the orientable tube rails complete the connections. Plan for a large play area: the spinning top alone measures 17 × 17 cm. The tracks H and I booklet offers plans for this spinning top.

Track plans to go further: Building booklet, tracks H and I (PDF): 6-entry funnel spinning top

4. The DUPLO brick tower

Difficulty: intermediate.

With the adapters for DUPLO / LEGO bricks, your children’s bricks become pillars: the track gains height, and therefore speed. Use that height for the vertical zigzag and the vertical U-turn, then extend the descent with zigzag rails. A good way to reuse the bricks you already have.

5. The DUPLO train layout

Difficulty: easy, from age 3.

On the DUPLO side, the 6-way crossing brings several lines together at the same junction, the flexible rail bends to create curves or go around an obstacle, and the sloped bricks create gentle slopes so that trains go up and down without derailing. These parts fit the DUPLO rails and bricks you already have at home.